All solid-state, electronically tuned by single-crystal and single
chip Large Scale Integrated (LSI) digital frequency synthesizer
Audio Output:
Adjustable up to 100mW into 500 ohm load
Power Requirements:
26 VAC
Output to Indicator:
DC sine and cosine voltages
Part Number
ADF Receiver Description
066-1077-00
Without ADF Superflag output (can be added with factory service bulletin)
066-1077-01
Current production model with ADF Superflag output
AVAILABLE KDF-806
Part #: 066-1077-00
ADF Receiver
PRODUCT FAQ
Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact sales@seaerospace.com
Can antennas from different ADF systems be interchanged?
No, common ADF systems such as the Bendix/King KR-87, KDF-806 and Collins ADF-60A, ADF-650A utilize their own unique antennas within the systems (i.e. KA-44B, ANT-60A/B, ANT-650A respectively). In addition, in most cases, these antennas are different sizes and have different hole patterns from each other.
What is the difference between Honeywell (Bendix/King) part numbers with 9 digits vs. 12 digits?
None, they represent the same unit. Original King Radio part numbers were 9 digits. For example, 066-3056-01. During the Bendix and King merger (i.e. Bendix/King), a new part numbering system was created that converted these 9 digit part numbers to 12 digits. Therefore, 066-3056-01 became 066-03056-0001. Despite this numbering change, units that were originally from the King Radio design still have the 9 digit part number format on the unit dataplate. The 12 digit format for King units appears to be used for catalog and internal Honeywell purposes only. Therefore, any unit that has a zero in its third to last number (i.e. XXX-XXXX-X0XX) has a 9 digit part number (i.e. XXX-XXXX-XXX) on its dataplate / ID Plate.
Why did Bendix/King change their part numbers from a 9 digit to a 12 digit format?
In January 1989 Bendix/King changed from a nine digit to a twelve digit part numbering system. The new, larger 12 digit numbers allowed for the inclusion of software version into the last two digits of the part number for certain units in which software changed frequently such as EFIS and TCAS processors. Therefore, the two digits immediately preceding the software version indicate the hardware version of the unit.
Different software versions imply different operational features and/or interface capabilities and software modifications imply software repairs (bug fixes) to insure proper operation of these features and interfaces. Software version upgrades frequently require hardware modifications to the unit. Such hardware modifications accompanying software version upgrades do not necessarily change the hardware version of the unit.
How does Southeast Aerospace calculate exchange prices and acceptable exchange cores?
Southeast Aerospace exchanges are based on the return of an undamaged, economically repairable core unit with identical part number as the unit shipped to the customer. An "economically repairable" core is defined as one where the cost to repair/overhaul (or Repair Cap) does not exceed 75% of the original SV/OH exchange price billed. Should the Repair Cap exceed 75%, the customer will be billed the additional amount. In the event this amount exceeds the Outright Price for the unit, the customer would only be billed the difference between the Outright Price and SV/OH Exchange Price with the core returned as-is to the customer.
Here is an example of such a transaction:
$1000 Exchange Price charged to customer
$1000 x .75 = $750 Maximum Allowable core repair charge or Repair Cap
$2000 Cost to repair core unit
- $750 Less Core repair cap
---------
$1250 Additional billing amount.
2250.00 Total Cost of transaction
Please Note:
SEA offers exchange on new items as well. However, repair cap as indicated above is still based on SV/OH exchange price.
Are SEA's Exchange prices negotiable?
Negotiating the exchange price of a unit only limits the allowable repair cap for the core unit. Southeast Aerospace's exchange transactions are based on the return of economically repairable core unit. Once the core is received and evaluated, the core repair cost incurred by SEA cannot exceed 75% of the original exchange price. That is, it cannot cost SEA more than 75% of the original exchange price collected from the customer. Therefore, when and if an SEA exchange price is discounted, there is a risk that additional charges may be assessed once the core is returned and evaluated.
For more information, please refer to these other Exchange FAQs
KDF-806 Product FAQ
Click on a question below to see the answer. If you have a question about this model that is not answered below,
please contact sales@seaerospace.com
Can antennas from different ADF systems be interchanged?
No, common ADF systems such as the Bendix/King KR-87, KDF-806 and Collins ADF-60A, ADF-650A utilize their own unique antennas within the systems (i.e. KA-44B, ANT-60A/B, ANT-650A respectively). In addition, in most cases, these antennas are different sizes and have different hole patterns from each other.
What is the difference between Honeywell (Bendix/King) part numbers with 9 digits vs. 12 digits?
None, they represent the same unit. Original King Radio part numbers were 9 digits. For example, 066-3056-01. During the Bendix and King merger (i.e. Bendix/King), a new part numbering system was created that converted these 9 digit part numbers to 12 digits. Therefore, 066-3056-01 became 066-03056-0001. Despite this numbering change, units that were originally from the King Radio design still have the 9 digit part number format on the unit dataplate. The 12 digit format for King units appears to be used for catalog and internal Honeywell purposes only. Therefore, any unit that has a zero in its third to last number (i.e. XXX-XXXX-X0XX) has a 9 digit part number (i.e. XXX-XXXX-XXX) on its dataplate / ID Plate.
Why did Bendix/King change their part numbers from a 9 digit to a 12 digit format?
In January 1989 Bendix/King changed from a nine digit to a twelve digit part numbering system. The new, larger 12 digit numbers allowed for the inclusion of software version into the last two digits of the part number for certain units in which software changed frequently such as EFIS and TCAS processors. Therefore, the two digits immediately preceding the software version indicate the hardware version of the unit.
Different software versions imply different operational features and/or interface capabilities and software modifications imply software repairs (bug fixes) to insure proper operation of these features and interfaces. Software version upgrades frequently require hardware modifications to the unit. Such hardware modifications accompanying software version upgrades do not necessarily change the hardware version of the unit.
How does Southeast Aerospace calculate exchange prices and acceptable exchange cores?
Southeast Aerospace exchanges are based on the return of an undamaged, economically repairable core unit with identical part number as the unit shipped to the customer. An "economically repairable" core is defined as one where the cost to repair/overhaul (or Repair Cap) does not exceed 75% of the original SV/OH exchange price billed. Should the Repair Cap exceed 75%, the customer will be billed the additional amount. In the event this amount exceeds the Outright Price for the unit, the customer would only be billed the difference between the Outright Price and SV/OH Exchange Price with the core returned as-is to the customer.
Here is an example of such a transaction:
$1000 Exchange Price charged to customer
$1000 x .75 = $750 Maximum Allowable core repair charge or Repair Cap
$2000 Cost to repair core unit
- $750 Less Core repair cap
---------
$1250 Additional billing amount.
2250.00 Total Cost of transaction
Please Note:
SEA offers exchange on new items as well. However, repair cap as indicated above is still based on SV/OH exchange price.
Are SEA's Exchange prices negotiable?
Negotiating the exchange price of a unit only limits the allowable repair cap for the core unit. Southeast Aerospace's exchange transactions are based on the return of economically repairable core unit. Once the core is received and evaluated, the core repair cost incurred by SEA cannot exceed 75% of the original exchange price. That is, it cannot cost SEA more than 75% of the original exchange price collected from the customer. Therefore, when and if an SEA exchange price is discounted, there is a risk that additional charges may be assessed once the core is returned and evaluated.
For more information, please refer to these other Exchange FAQs
NOTE: Please Click Here to Review Important Information for this Repair Quote. Current average turn-time is 5-10 days. Click Here to submit a Return Material Authorization form.
Part#
Bench Test
Avg Repair
Avg Overhaul
Notes
066-1077-00
$220.00
$770.00
$650.00
066-1077-01
$220.00
$550.00
$650.00
Item is not available for over-the-counter(OTC) sale and must be installed by Southeast Aerospace.
If you are interested in an installation quotation, please click here.
My RFQ 
RFQ is empty
View / Manage
Submit RFQ
Authentication 
Help
