PRODUCT
INFORMATION
PAGE

PMA6000M
FEATURES
  • Designed to be pin-compatible with the Bendix/King KMA-24 audio selector panel
  • Combines versatile selector panel with six-place, keyed intercom
  • Available in stereo version ("S" version) - PMA-6000MS
  • Offers marker-beacon receiver ("M" version) with marker self-test
  • Available with third comm input ("C" version)
  • Split pilot and copilot communications capability allows crew to independently and simultaneously use both radios even transmitting simultaneously on different frequencies
  • Split music inputs for front and back seat usage
  • Independent volume and squelch controls for pilot and copilot
  • Soft Mute technology subtly ramps music down when conversation comes across either intercom or radio
  • Remote swap function allows pilots to use a yoke-mounted switch to select Comm 1 and Comm 2 options without reaching for panel
  • Muting for selected receiver during transmit when in COM1 or COM2 mode
  • Separate voice and audio amplifiers for passengers
  • Backlit switches with photo sensor
  • Fail-safe feature automatically hard-wires pilot to Comm 1 in case of outtage
  • One-minute Digital Recorder available as option
  • Available with black or silver trim for faceplate
  • 3 year warranty on factory new units
SPECIFICATIONS
FAA TSO: C50c, C35d, DO-160b, DO-170, DO-143 Env. Categories: A1D1/CAMXXXXXXBBBBBAAX
Max. Current: 1 amp Operating Current: 350mA (typical, speaker off), 600mA -speaker on (1 amp peak)
Temperature: -20 to 55C Altitude: 50000 ft.
Dimensions: 6.25"W x 1.3"H x 6.8"D Weight: 0.8 lbs.
Input Impedence: 510 Ohms for all audio inputs Input Isolation: >60dB (70dB typical)
Marker Frequency: 75 MHz crystall controlled Marker Sens: 200 uVolts (high), 1000 uVolts (low)
Marker Selectivity: -6dB at 110kHz, -40dB at 120kHz Marker Lamp Output: 9.0 Volts (when active) @ 125 mA

pma6000m