PRODUCT
INFORMATION
PAGE

System 65
FEATURES
  • Two axis roll and pitch autopilot
  • System includes seperate programmer & annunciator (shown above), turn coordinator, roll & pitch servos, remote roll & pitch computers, and altitude pressure transducer
  • Heading mode, VOR/LOC/LOC backcourse intercept and tracking
  • Glideslope capture and track
  • Vertical speed command for climb and descent control
  • Altitude Hold and automatic elevator pitch trim (check STC List )
  • VOR/LOC/GS Course Deviation Warning
  • Programmer can be either pedestal or panel-mounted
  • LCD annunciations
  • Back-lighted switches
  • Pitch Trim annunciation when autotrim inoperative


  • ** CALL FOR INSTALLATION PRICE - OVER THE COUNTER SALES ONLY FOR EXPERIMENTAL AIRCRAFT
*OPTIONS

SPECIFICATIONS

SYSTEM:
Avg. Operating Current: 0.5 amp Max. Current: 3.0 Amps
TSO: FAA requirements C-9c

PROGRAMMER:
Power Requirements: 14/28 VDC Weight: 0.6 lbs.
Dimensions: 5.14" x 2.0" x 2.0"

ANNUNCIATOR:
Power Requirements: 14/28 VDC Weight: 0.9 lbs.
Dimensions: 3.42" x 1.60" x 6.50"

TURN COORDINATOR:
Power Requirements: 14/28 VDC Flag Voltage Detector: (operating limits) 9.0 VDC approx.
Flag RPM Detector: (operating limits) nominal RPM less 10% Current Requirements: 0.3 Amp
Weight: 1.8 lbs. Dimensions: 3.28" x 3.28" x 5.62"

ROLL SERVO:
Power Requirements: 14/28 VDC Current Requirements: Included in System value power required
Weight: 2.9 lbs. Dimensions: 3.75" x 3.75" x 7.25"

ROLL COMPUTER:
Power Requirements: 14/28 VDC Weight: 3.3 lbs.
Dimensions: 5.25" x 2.1" x 13.3"

PITCH COMPUTER:
Power Requirements: 14/28 VDC Weight: 3.3 lbs.
Dimensions: 5.25" x 2.1" x 13.3"

PITCH SERVO/TRIM SENSOR:
Power Requirements: 14/28 VDC Current Requirements: Included in System value power required
Weight: 2.9 lbs. Dimensions: 3.75" x 3.75" x 7.25"

ALTITUDE PRESSURE TRANSDUCER:
Power Requirements: 10 VDC (supplied by pitch computer Current Requirements: Included in System value power required
Weight: 2.9 lbs. Dimensions: 3.75" x 3.75" x 7.25"

sys65