Part #:

Model: SL-40

UPS Aviation - VHF Comm with Intercom
product image
Part Number :


SL40
FEATURES
  • 760 comm channels (frequency range 118 to 136.975 MHz)
  • Active and standby "flip/flop" frequencies
  • Volume Control
  • 16 character high-intensity alphanumeric LED display (direct sunlight readable with automatic dimmer)
  • Transmit status indicator
  • Back-lit keypad controls
  • 2x8 frequency memory and recall stores/recalls 8 user defined frequencies stores/recalls previous 8 frequencies
  • Frequency monitor function (listens to standby while monitoring the active)
  • Dedicated emergency frequency channel selector.
  • Built-in intercom function - two place voice-activated intercom standard , with two microphone inputs.
  • Squelch test function
  • Stuck mic time-out
  • Automatic squelch with manual override
  • Internal non-volatile memory - no batteries required for frequency storage
  • Full range input supply voltage standard - install in 14 VDC or 28 VDC aircraft without additional power converters
  • 12 watt audio amplifier into 4 ohms
  • Available in Base Station Desktop version
  • Available in Land Mobile version

 

SPECIFICATIONS
Input Voltage: 10 VDC to 40 VDC, reverse polarity protected Input Power: 4 watts typical, receive 28 watts typical, transmit
Internal Fuse: 7 amp fast blow, soldered in board Height: 1.30 inches
Width: 6.25 inches Depth: 11.452 inches
Weight: 2.1 lb Operating Temperature: -20C to +55C
Maximum Altitude: 35,000 ft Output Power: 8 watts min. carrier at >12VDC input 6 watts min at 10VDC input

 

430-6040-202
- VHF Comm with Intercom
Price Condition Delivery
CALL OR RFQ CALL OR RFQ CALL OR RFQ

SEA Repair Capabilities: No

430-6040-800
- GPS/Comm (Unit Only)
Price Condition Delivery
CALL OR RFQ CALL OR RFQ CALL OR RFQ

SEA Repair Capabilities: No

435-4008-200
- VHF Comm (Complete)
Price Condition Delivery
CALL OR RFQ CALL OR RFQ CALL OR RFQ

SEA Repair Capabilities: No

Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact questions@seaerospace.com

The SL series keeps track of the last eight active frequencies and stores them in a stack. Duplicate frequencies are not stored.

Garmin portable devices can be interfaced to the SL-30 and SL-40 for remote frequency loading by using the appropriate bare wires cable. Each Garmin aviation portable device has an optional accessory available for it that will allow your avionics installer to interface it with the SL-30 and SL-40. Additionally, the Interface setting on the Garmin portable should be set to VHF Out. More information on the Garmin portable settings can be found in the appropriate Pilot's Guide.

Frequency Monitoring allows you to listen to the standby frequency, while monitoring the active frequency for activity. Simply press the MON button to listen to the standby frequency.