Picture of product PAR200A
Model: PAR200A
Desc: Audio Panel w/ VHF Transceiver
OEM: PS Engineering
Part Number :


PAR200A 
FEATURES
  • The Pilot can store up to 5 frequencies in non-volatile memory so he can easily tune to his frequently used channels
  • The radio also has autosquelch, so you will always have optimal radio sensitivity
  • The left half controls the audio panel for radio selection, intercom and music volume, intercom modes, and multiple music mute mode control
  • The PAR200A has two independent music inputs. Independent power supplies assure operation in failsafe on the audio panel; the VHF radio can still be used
  • The PAR200A can be configured as stand alone, as COM 1, or as COM 2.  This provides flexibility to allow the aircraft owner to decide if a second radio will be used and in what position
  • The PAR200A includes a cockpit speaker amplifier for additional flexibility
  • An integrated Bluetooth® system allows the PAR200A to interface with cellular telephones, giving the aircraft occupants ready access to their telephones
  • In addition, the Bluetooth® will stream music from compatible devices like iPads,and smart phones
  • The PAR200A is an FAA Approved system that combines an audio control panel, 4-place stereo IntelliVox® intercom with Bluetooth®, and a remote mounted, 760/2280-channel VHF aviation communications transceiver
  • This system saves cockpit space, weight, and money over stand-alone independent systems while providing the most sought after functionality
  • The PAR200A is attractive for the aircraft that is used primarily for VFR missions or as an audio panel/back-up com to more advanced systems
  • The elimination of one panel mounted radio saves valuable panel space
  • Seamless integration between the audio panel and the radio was the goal for the best user experience possible, while keeping the system costs to a minimum
  • The right half of the PAR200A is dedicated to the communication radio, with an easy to read LCD display that shows the frequencies, which are controlled through a concentric knob
  • This radio has active and standby frequencies, and a standby frequency monitor mode that permits listening to both active and standby frequencies
  •  Additional PAR200A Information: PAR200A Installation Manual
SPECIFICATION
PAR200A AUDIO PANEL& RADIO:  - FAA - TSO - EASA - ETSO PAR200A UNIT Weight: 1.1 lb. (0.49 kg)
OPERATING Temperature RANGE: -20º C to 55ºC , short term -40°C to +70°C RACK WITH CONNECTORS: 0.51 lb. (0.24 kg)
AUDIO SELECTOR / INTERCOM: FAA TSO C139 EASA ETSO C139 VOLTAGE: 11-33 VDC (18-33 with TY92
eNVIRONMENT QUALIFICATION : DO-160G-A1C1BAESRXXXXXXZ B(XX) ABATTBXXA2E2 XXX MAXIMUM CURRENT:  2.5 Amp (Externally protected by a 3A pull-type breaker)
ALTITUDE:  Up to 35,000 feet in an non-pressurized area input isolation:  60 dB (min.)
receiver inputs:  4 (Com 1, Com 2, Nav 1, Nav 2) AUDIO SELECTOR PANEL Impedance: Input-510 Ω
unswitched inputs: 4 transmitter selector: 3 (Com 1, Com 2, Com 1/2)
headphone impedance: 150 – 1000 Ω headphone output: 30 mW each headset, no clipping <1% THD typical into 150 Ω)
speaker output: (into 4 Ω) with no clipping 14 VDC: 3 Watts (min.) 28 VDC: 10 Watts (min.) microphone impedance: 150 - 600 Ω
intercom position: 4 places (with individual IntelliVox® circuits) (8 with expansion, -0202 ONLY) music inputs: 2 (Independent, Stereo)
distortion: <1% THD @ 30 mW into 150Ω mic freq. response: 3 dB-300 Hz - 6000 Hz
MUSIC FREQ. RESPONCE: 3 dB-20 Hz - 20 KHz CHANNELS (TRANSMIT & RECEIVE) 760 channels, 25 KHz spacing 2280 channels, 8.33 KHz spacing
PWR CONSUMPTION RECEIVE (NO SIGNAL): 2.8W @ 14VDC TRANSMIT: 3.2A
INPUT VOLTAGE: 11-33 VDC 5A Circuit Breaker. POWER OUTPUT: 6 watts (nominal) VSWR Tolerance < 2:1 for best operation (5:1 without damage)
RECEIVER SENSITIVITY: -6dB SINAD @ 5µV (1KHz audio with 70% modulation) TEMPERATURE RANGE: -20 to +70 degrees Celsius
TY91L  vhf input Voltage: 11-33 VDC 5A Circuit Breaker TY91L  vhf WEIGHT: 0.77 lbs (0.350 k)
TY91L  vhf FCC ID: VZI00882 par200a dimensions: Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm) Depth behind panel 7.15 in. (18.16 cm)
TY91L VHF Transceiver Dimensions : W-2.5” x H-1.9” x D6.3” (plus 1.5” for harness) W66mm xH-48mm x D-160 (plus 35mm for harness TY91L frequency control: PLL frequency synthesis, which is microprocessor controlled Memory is store in non-volatile EPROM

 

part number  description:
050-228-0200 Audio Selector Panel with Trig TY91L Remote 8.33KHz VHF Transceiver - 6 Watts
050-228-0201 Audio Selector Panel with Trig TY92L Remote 8.33KHz VHF Transceiver - 16 Watts

 

 

050-228-0200
- Audio Panel w/ Comm Radio (8 Watts)
Price Condition Status
REQUEST NEW OUTRIGHT REQUEST LEAD TIME
050-228-0201
- Audio Panel w/ Comm Radio (16 Watts)
Price Condition Status
REQUEST NEW OUTRIGHT REQUEST LEAD TIME

Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact questions@seaerospace.com


In relation to NE (New) parts, many OEMs change their prices and availability without any notice to dealers or the industry. Therefore, through the REQUEST or RFQ indication, we ask that customers contact us for the most accurate price and availability.

In relation to SV & OH parts, the used parts aftermarket in the aviation industry is not an infinite supply. It is a dynamic, constantly changing market that is significantly affected by and susceptible to highs and lows in supply and demand. Therefore, although we attempt to, at times, we are unable to predict the exact moment when an item may be available. Once again, through the REQUEST or RFQ indication on our website, we ask that customers contact us for the most current and accurate price and availability.

PLEASE NOTE - Publications are for Reference Only