RT-131A 4000763-3101

Honeywell - Radar Receiver/Transmitter
Part Number :


RT-131A
FEATURES
  • Radar Receiver Transmitter used in many Bendix 3-piece color and monochrome radar systems
  • Provides X-band pulses at 100 Hz PRF, 3.5 microsecond pulse width, and at 8 kw peak power output
  • Solid-state receiver
  • Contains self-test feature
  • DC powered
  • Can be vertical or horizontal mounted
  • Pitch and roll stabilization compatiable
SPECIFICATIONS
TSO: C63b DO-138 Env. Cat. BA/LNJ/AAAXXXXXX Weight: 10.5 lbs.
Dimensions: 5.04"W x 7.72"H x 13.83"L Pressurization: None required
Frequency: (X-Band) 9375 MHz +-30 MHz RF Power Output: 8 kW peak power
Part NumberRadar Receiver Transmitter Description:
4000763-3101 see features above

 

4000763-3101
- Radar Receiver/Transmitter

NSN: 5841-01-544-8431

Price Condition Delivery
$2,450.00 SV OUTRIGHT CALL OR RFQ

SEA Repair Capabilities: Yes

Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact questions@seaerospace.com

As part of our promise to provide the most honest, quality service to our customers, Southeast Aerospace adheres to strict guidelines for certification according to the FAA and Original Equipment Manufacturers (OEM). While most avionics components do not include a prescribed overhaul procedure in the Maintenance Manual, the FAA has set forth guidelines for the cleaning and inspecting of components as referenced in FAR Part 43.2. Therefore, if a component cannot meet the standards of this Federal Air Regulation in relation to inspection criteria and cleaning potential then it should not be deemed as Overhauled. Southeast Aerospace does not believe in simply providing words on a tag or maintenance release to represent the condition of a component. SEA stands behind the work and service followed through with each and every FAA 8130-3 maintenance release it provides.
The IN-132A, IN-152A, IN-1102A monochrome and IN-2026A, IN-2027A, IN-2028A color indicators are compatible with the RT-131A for normal system operation. The IN-232A color indicator is also compatible if the RT-131A has Mod 6 on the receiver board to allow for 240 nmi operation. Please note that some system performance variations may occur if different antenna arrays are utilized in systems.
Weather radar transceivers use a magnetron which is basically a cathode emission device. The magnetron is subject to deteriorization due to aging. Therefore, it is recommended to perform some type of periodic maintenance to detect and correct the effects of aging. This reduces the chance of an in-service failure.

An annual, routine test of the following parameters should made:

- Power output
- Transmitter frequency
- AFC voltage
- Sensitivity (MDS)

Ideally, the test should take place between December and March prior to the peak thunderstorm season.