Picture of product ADF-60B

Part #: 622-2873-001

Model: ADF-60B




Collins Aerospace


ADF Receiver

Part Number :



  • Remote mount ADF receiver
  • Typically used with ANT-60A/B combined sense/loop antennas, either 614L-11/12/13 analog controls or CTL-60, CTL-62 (w/ CAD-62) digital controls, and RMI-36 indicators as a system
  • DC sin/cos RMI output only
  • Completely solid-state, no rotating machinery
  • Coherent detection to demodulate bearing signal for reduced bearing errors and safety hazards caused by adjacent channel signals
  • Automatic band switching for ease of frequency selection over entire operating range
  • Audio muting and pointer stowage with unusable signal
  • Digital tuning combined with single crystal frequency synthesizer
  • Digitally stabilized frequency synthesizer
  • Crystal filter selectivity
  • Modular construction
  • Same as ADF-60A but does not have 3-wire synchro output for use with 3-wire RMI units

*Image shown is an ADF-60A due to similarities in appearance between units.

TSO: C41c, Env CAT/AD/A/JNG/AAAXXXXXX, class A selectivity RTCA document: DO-138, DO-142
Weight: 4.2 lbs. Temperature: -54 to +55 C (continuous)
Altitude: To 60000 ft. Power Requirements: 27.5 V dc, 600 mA
Frequency control: BCD digital, four wires per decade Operational modes: ANT, ADF, TONE/ CW
Types or reception: AM,CW,MCW Frequency range: 190 kHz to 1749.5 kHz in 6 bands
Tuning increments: 0.5 kHz Bandwidth: 2.8 kHz at 6 dB nominal
Spurious response: At least 80 dB below desired response Audio output: 100 mW into 600 ohm load
CW ident: 1000-Hz tone Sensitivity: Per RTCA paper DO-142
Part Number: Description:
622-2873-001 ADF Receiver


- ADF Receiver

NSN: 5825-01-335-5226

Price Condition Status

Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact questions@seaerospace.com

In relation to NE (New) parts, many OEMs change their prices and availability without any notice to dealers or the industry. Therefore, through the REQUEST or RFQ indication, we ask that customers contact us for the most accurate price and availability.

In relation to SV & OH parts, the used parts aftermarket in the aviation industry is not an infinite supply. It is a dynamic, constantly changing market that is significantly affected by and susceptible to highs and lows in supply and demand. Therefore, although we attempt to, at times, we are unable to predict the exact moment when an item may be available. Once again, through the REQUEST or RFQ indication on our website, we ask that customers contact us for the most current and accurate price and availability.