Part #: 066-1062-10

Model: KT-76A

NSN:

5895-01-269-4441

OEM:

BendixKing

Desc:

Transponder

Part Number :


KT-76A

 

FEATURES

  • 4096 code, Mode A/C, Class 1A, panel-mounted ATC transponder
  • Altitude reporting capability
  • System test feature
  • All encoder and decoder functions built into single, plug-in Large Scale Integration chip
  • IDENT button may be remotely mounted
  • 200 watts peak minimum transmitter power
  • 14 volt, but can be 28V with optional conversion kit
  • Operates up to 35,000 feet
  • Models available with either white or blue/white lighting (see table below)
  • TSO'd

 

SPECIFICATIONS

Size: 6.25"W x 1.63"H x 10.0"L Weight: 3.1 lbs.
Applicable Documents: TSO C74b, RTCA DO-138, DAPBBBXXXXXX Class I Temperature Range: -15 to +55C for continuous operation
Transmitter Frequency: 1090 MHz +-3 MHz Receiver Frequency: 1030 MHz (crystal controlled local oscillator
Receiver Sensitivity: -74dBm (nominal); -72dBm (min. for 90% reply) Mode A Capability: 4096 identity codes plus Special Identification Pulse
Mode C Capability: Accepts standard ICAO Altitude Transmission Code digitizer output, reporting in 100 ft. increments from -1000 ft. up to 63,000 feet Side Lobe Suppression: 3 pulse
Part Number: Description:
066-1062-00 Standard version with white lighting, Transponder
066-1062-02 Same as -00 unit but with blue/white lighting, Transponder
066-1062-10 Crown series version with solid black face and no silver lining trim

 

066-1062-00
- Transponder

NSN: 5895-01-269-4441

Price Condition Status
$1,550.00 SV OUTRIGHT 5 IN STOCK
066-1062-02
- Transponder
Price Condition Status
REQUEST OH OUTRIGHT REQUEST LEAD TIME
066-1062-10
- Transponder (Crown Series)
Price Condition Status
REQUEST OH OUTRIGHT REQUEST LEAD TIME

Click on a question below to see the answer. If you have a question about this model that is not answered below, please contact questions@seaerospace.com


In relation to NE (New) parts, many OEMs change their prices and availability without any notice to dealers or the industry. Therefore, through the REQUEST or RFQ indication, we ask that customers contact us for the most accurate price and availability.

In relation to SV & OH parts, the used parts aftermarket in the aviation industry is not an infinite supply. It is a dynamic, constantly changing market that is significantly affected by and susceptible to highs and lows in supply and demand. Therefore, although we attempt to, at times, we are unable to predict the exact moment when an item may be available. Once again, through the REQUEST or RFQ indication on our website, we ask that customers contact us for the most current and accurate price and availability.

For the most part, the KT-76C is a direct fit and form replacement for the KT-76A. However, there are considerations when replacing a KT-76A that was installed into a 28V aircraft installation. The original KT-76A utilized a voltage changeover (i.e. dropping resistor) kit for the KT-76A to be installed to a 28V installation.  The KT-76C was designed to operate from any input voltage of 11-33 VDC.  Therefore, the dropping resistor is not needed for the KT-76C in a 28V aircraft. The original droppiong resistor is removed from the original KT-76C wiring harness. In addition, the harness fuse needs to be changed from 3A to 5A. If an RFI suppression adapter was installed originally, then it must be removed as well.

No. The KT-76A uses a different mounting rack and installation kit than the KT-76. A rack and connector change is necessary for this upgrade.
No. The Bendix/King KT-73 Level 2 Datalink Transponder uses a different mounting rack and installation kit from the KT-76A. However, the KT-73 does use the same mounting rack as the KT-76C.
The KT-76A has a plastic bezel assembly which contains the selector switches for ATC code input. This faceplate is held onto the radio assembly by 4 screws. When the faceplate ages, is mishandled or secured too tightly, this plastic bezel can crack. If left cracked and with continued usage, this faceplate can eventually become separated from the transponder thus increasing the possibility of erroneous transponder performance. Overhauled units from Southeast Aerospace always include either a new faceplate assembly or one without cracks of any type to ensure optimal performance of the transponder.
None, they represent the same unit. Original King Radio part numbers were 9 digits. For example, 066-3056-01. During the Bendix and King merger (i.e. Bendix/King), a new part numbering system was created that converted these 9 digit part numbers to 12 digits. Therefore, 066-3056-01 became 066-03056-0001. Despite this numbering change, units that were originally from the King Radio design still have the 9 digit part number format on the unit dataplate. The 12 digit format for King units appears to be used for catalog and internal Honeywell purposes only. Therefore, any unit that has a zero in its third to last number (i.e. XXX-XXXX-X0XX) has a 9 digit part number (i.e. XXX-XXXX-XXX) on its dataplate / ID Plate.
In January 1989 Bendix/King changed from a nine digit to a twelve digit part numbering system. The new, larger 12 digit numbers allowed for the inclusion of software version into the last two digits of the part number for certain units in which software changed frequently such as EFIS and TCAS processors. Therefore, the two digits immediately preceding the software version indicate the hardware version of the unit.

Different software versions imply different operational features and/or interface capabilities and software modifications imply software repairs (bug fixes) to insure proper operation of these features and interfaces. Software version upgrades frequently require hardware modifications to the unit. Such hardware modifications accompanying software version upgrades do not necessarily change the hardware version of the unit.
The Silver Crown version has silver trim lining the outside of the faceplate. The Crown Series version has a completely black bezel with no silver trim lining. There is no functional difference between these 2 units. Both utilize the same mounting rack and connector.

Please see the example below of the different versions:
Yes, anytime a transponder is removed or replaced an altitude correlation between what the transponder is reporting and what is displayed on the altimeter needs to be performed. This is outlined in FAA CFR Part 91.413. This regulation indicates that following any installation or maintenance of a transponder where data correspondence error could be introduced, the integrated system has been tested, inspected, and found to comply with paragraph (c), appendix E. Furthermore, these references indicate that an integration test between the altitude reporting equipment and transponder system must be conducted.

For complete information, please refer to these FAA regulations or contact Southeast Aerospace Tech Support team at shop@seaerospace.com.

The KT-78A is simply a low power version of the popular KT-76A transponder. The KT-78A peak power is 113 watts minimum while 200 watts for the KT-76A. The KT-78A was originally designed for low flying aircraft that operated in very local areas such as crop dusting (agriculture) applications. Both the KT-76A and KT-78A are 14 volt radios that utilize the same mounting rack and connector. Therefore, the higher power KT-76A is an ideal direct replacement for the KT-78A considering that the KT-78A has not been manufactured for many years and is therefore scarce on the used market.

Negotiating the exchange price of a unit only limits the allowable repair cap for the core unit. Southeast Aerospace's exchange transactions are based on the return of economically repairable core unit. Once the core is received and evaluated, the core repair cost incurred by SEA cannot exceed 75% of the original exchange price. That is, it cannot cost SEA more than 75% of the original OH/SV exchange price collected from the customer. Therefore, when and if an SEA exchange price is discounted, there is a risk that additional charges may be assessed once the core is returned and evaluated.

Although some manufacturers call out specific transponder antennas in their installation manuals, almost any transponder antenna can be used with any transponder. Various models are available based on the screw hole pattern desired and the speed & drag considerations based on the aircraft type.
 


For smaller general aviation aircraft, Southeast Aerospace recommends the stub type AV-22 or CI-101 antenna.

 

 

For medium to larger aircraft, Southeast Aerospace recommends the blade type CI-105 or AV-74 antenna.

 


Ultimately, it is the responsibility of the installer or installing agency to determine what antenna is suitable for the aircraft application.

 

 

 

The original KT-76A mounting rack Part Number is 047-03898-0002. The rack included with a new KT-76C is Part Number 047-09628-0004. Either unit will fit into either rack. Also, as a direct, slide-in replacement for the KT-76A, the KT-76C utilizes the same connector in the same rack position as the KT-76A.

Rack P/N 047-09628-0004 was also used with the KT-70 and KT-71 transponders. Therefore, the 047-09628-0004 rack included additional features such as a port for cooling fan connection and space for a configuration module.